Business Cards | Laminated | Raised Foil
Make a lasting impression with our top-of-the-line laminated business cards. Designed for professionals, these cards offer a perfect blend of durability and elegance. Our lamination process preserves your design's colors and details while striking foil accents will help your cards stand out from competition
Material:
19pt stock (16pt gloss cover C2S + 1.5 mil Gloss Laminating 2 sides)
Corner styles:
- Square
- Rounded 1/4"
Two-sided or one-sided print for the same price
Finishing:
- Matte Lamination
- Soft Touch Lamination
Special Finishing:
- Raised Metallic Foil (Gold)
- Raised Metallic Foil (Silver)
Quantity: from 100
Production time:
- Square corners - 6 business days
- Round corners - 7 business days
Delivery options:
- Free Pickup at: 300 New Toronto Street, Etobicoke, M8V 2E8
- GTA : Flat fee - $15 , 1-2 business days
- Ontario: Flat fee - $25 , 2-3 business days
We often hear that customers have artwork that’s supposedly ready for print.
So we created a checklist for you to go through so that you can double-check if your design is indeed ready to go.
If all criteria are met – your design is prepared for print. If you’re unsure, shoot it over to us for review.
- The artwork must be submitted as a PDF file.
- Ensure your PDF is high resolution and all images are CMYK. We only accept 300 dpi files and no less.
- All fonts should be embedded or outlined.
- Please keep all text at least 0.125″ inside the cut-line.
- The bleed for Standard Products is 0.125″. The bleed for Booklets and Presentation Folders is 0.25″.
- Use black (100% K) only for fine lines and text.
- We recommend using C 60 M 40 Y 40 K 100. This will give you a deep, dark, rich black.
For best results, we strongly recommend you ensure the following to avoid delays and/or unexpected print results.
- Supply fonts larger than 8pt
- Use sans serif fonts
- Avoid having artwork underneath the foil areas (i.e. using a mask instead)
- Avoid areas of heavy foil coverage with small/fine (non-foil) text or linework knocked out, as there is a tendency for these to fill in.
CAUTION: Our foil machine manufacturer does not recommend extending the foil design to the trimmed edge of the card, as there would be a high possibility of the foil peeling off along the trimmed edges. There should be at least a 5mm foil-free area around the edges. If you supply foil files with full bleed, please note our automation will automatically apply a 5 mm gap (from the trim edge) on your foil files to prevent the risks of the trimmed edges lifting/peeling. The non-foiled gap area may be visible along the edges as a result. It is best to avoid full bleed on your foil files for the above reasons.
We hope this checklist helps you ensure your artwork is ready for print.
If you have any questions, please don’t hesitate to contact us.
We’re here to help!