Business Cards | Laminated | Raised UV
*You can get $50 off your order of this product if you provide a ready-to-print file. You can find all file requirements and templates further down on this page.
This products' price includes design and print. Wligible for $50 discount*
*You can get $50 off your order of this product if you provide a ready-to-print file. You can find all file requirements and templates further down on this page.
Raised Spot UV business cards are a luxurious and impactful choice for making a lasting impression. Made from premium laminated 19pt stock and finished with Raised UV these cards offer unlimited design options tailored to your needs.
Material:
19pt stock (16pt gloss cover C2S + 1.5 mil Gloss Laminating 2 sides)
Corner styles:
- Square
- Rounded 1/4"
Two-sided or one-sided print for the same price
Finishing:
- Matte Lamination
- Soft Touch Lamination
Special Finishing:
Raised Spot UV
Quantity: from 100
Production time:
- Square corners - 6 business days
- Round corners - 7 business days
Delivery options:
- Free Pickup at: 300 New Toronto Street, Etobicoke, M8V 2E8
- GTA : Flat fee - $15 , 1-2 business days
- Ontario: Flat fee - $25 , 2-3 business days
We often hear that customers have artwork that’s supposedly ready for print.
So we created a checklist for you to go through so that you can double-check if your design is indeed ready to go.
If all criteria are met – your design is prepared for print. If you’re unsure, shoot it over to us for review.
- The artwork must be submitted as a PDF file.
- Ensure your PDF is high resolution and all images are CMYK. We only accept 300 dpi files and no less.
- All fonts should be embedded or outlined.
- Please keep all text at least 0.125″ inside the cut-line.
- The bleed for Standard Products is 0.125″. The bleed for Booklets and Presentation Folders is 0.25″.
- Use black (100% K) only for fine lines and text.
- We recommend using C 60 M 40 Y 40 K 100. This will give you a deep, dark, rich black.
On the spot UV template file, indicate the spot UV areas by using 100% K. Non-UV areas should be white. For best results, ensure this file is a vector.
If you require one side to be completely UV-coated, the corresponding page in your template file should be entirely filled with 100% K.
If ordering a 4/4 job with spot UV on only one side, please ensure that page 1 of your artwork is the spot UV side.
CAUTION: Our spot UV machine manufacturer does not recommend extending the spot UV design to the trimmed edge of the card, as there would be a high possibility of the spot UV peeling off along the trimmed edges. There should be at least a 5mm spot UV-free area around the edges. If you supply spot UV files with full bleed, please note our automation will automatically apply a 5 mm gap (from the trim edge) on your spot UV files to prevent the risks of the trimmed edges lifting/peeling. The non-spot UV varnished area may be visible along the edges as a result. It is best to avoid full bleed on your spot UV files for the above reasons.
Spot UV Accuracy
Positioning of the spot UV cannot be 100% guaranteed. Please note that there may be a shift of approximately 1/16" in the spot UV position on the printed product. We do not recommend placing spot UV on small text or very small images.
We hope this checklist helps you ensure your artwork is ready for print.
If you have any questions, please don’t hesitate to contact us.
We’re here to help!